Operation Instruction - Epson FX-980 Service Manual

FX-980

1.5 Operation Instruction

This section provides information on the FX-980 control panel buttons,
LED, and operations. Since the layout and functions of the control panel
are mostly common to those of FX-2170, this section only provides the
information that is specific to FX-980. For other information, see FX-
2170 Service Manual.
Figure 1-3. Control Panel
Product Description


Operations at power on
Turning on the printer while pressing panel buttons executes the
functions shown in the following table.
No.
1 Load / Eject
2 LF / FF
3 Pitch
4 Load / Eject & LF / FF
5 Font & Tear Off / Bin
6 Tear Off / Bin & LF / FF
7 Pause
8 Font
9 The others
Operation Instruction
Table 1-14. Operations at Power On
Buttons Function
NLQ self test
Draft self test
Default setting (See the following table for
the setting menu.)
Data dump
EEPROM clear
Clear EEPROM for Driving Line count for
ribbon change timing
Bi-d adjustment
Alternates copy mode on and off.
When "off" is selected, beeps one time.
When "on" is selected, beeps two times.
The setting is saved to non-volatile
memory.
Not available.
Revision A
23