FX-980
Notice the location of the CBC lamitite screw (3 x 8,
F/Zn). Refer to Figure 3-37 on the previous page.
Lock CN10 and CN11 by pushing down each
connector's lock after inserting the connector cable.
The tightening torque for the CBB (3 x 12, F/Zn)
screw and CBB (3 x 8, F/Zn) = 0.78 - 0.98 Nm (8 - 10
Kgf - cm)
Disassembly and Assembly
Printer Disassembly and Assembly
Revision A
43