Epson FX-980 Service Manual page 13

FX-980


Release lever: See the following table.
Table 1-5. Release Lever Settings
Lever Position Paper path / Feeder
Manual insertion (front)
Manual insertion (rear)
Friction
CSF Bin 1
CSF Bin 2
Roll paper holder
Push tractor feed (front)
Front tractor
Push & Pull tractor feed
(front)
Push tractor feed (rear)
Rear tractor
Push & Pull tractor feed
(rear)
Pull tractor feed (front)
Full release Pull tractor feed (rear)
Pull tractor feed
(bottom)
Product Description
Paper / Media
Cut sheet
(Single sheet & Multipart), Card
Cut sheet (Single sheet & Multipart),
Card, Envelope
Cut sheet (Single sheet & Multipart),
Card, Envelops
Cut sheet (Single sheet)
Roll paper
Continuous paper (Single sheet &
Multipart), Continuous paper with labels
Continuous paper (Single sheet &
Multipart), Continuous paper with labels
Continuous paper
(Single sheet & Multipart)
Continuous paper
(Single sheet & Multipart)
Continuous paper (Single sheet &
Multipart), Continuous paper with labels
Continuous paper
(Single sheet & Multipart)
Continuous paper (Single sheet &
Multipart), Continuous paper with labels
Hardware Specifications


Paper thickenss lever: See the following table.
Table 1-6. Adjust Lever Setting Position
Paper Thickness (inch)
Setting
Position
Minimum
0 0.0024
1 0.0043
2 0.0071
3 0.0079
4 0.0098
5 0.0126
6 0.0154
Revision A
Paper Thickness (mm)
Maximum
0.0043 over 0.06 up to 0.11
0.0071 over 0.11 up to 0.18
0.0079 over 0.18 up to 0.20
0.0098 over 0.20 up to 0.25
0.0126 over 0.25 up to 0.32
0.0154 over 0.32 up to 0.39
0.0185 over 0.39 up to 0.47
13