Epson DFX-8500 Service Manual page 19

‰
Overlapping multi-part forms :
PW (width)
PL (length)
LM (left margin)
RM (right margin)
TM (top margin)
BM (bottom margin)
OL (overlapping length)
NA (non printable area)
Notes 1: Feeding backward or paper (PATH) selection are prohibited.
Notes 2: If In the top 75 mm area, the paper feeding pitch may be irregular.
Notes 3: If the optional pull tractor is used, the top 120 mm area should not be printed..
Notes 4: Forms-override printing is available 20 lines after the paper end.
(Paper feeding pitch is not guaranteed.)
The end of the printable area is 9 to 15 mm apart from the bottom edge of the paper.
Rev. B
Figure 1-6. Overlapping Multi-part Form Printable Area
Refer to Figure 1-6.
Continuous Paper
Refer to Section 1.2.12.
Refer to Section 1.2.12.
19 mm to 31mm
19 mm or more
21.2 mm or more
4.2 mm or more
Less than 13.3 mm
25.4 mm or more
GENERAL DESCRIPTION
1-
11