Paper Support Assembly Removal - Epson DFX-8500 Service Manual

3.2.6.23 Paper Support Assembly Removal

Step 1: Disassemble the carriage mechanism and remove all the parts related to the carriage. (Refer to
Section 3.2.6.22.)
Step 2: Referring to the exploded diagram in the Appendix, remove the paper support assembly.
When you install the paper support assembly, perform the following adjustments:
Carriage timing belt tension adjustment (described in Section 4.1.2)
Carriage guide shaft parallelism adjustment (described in Section 4.1.5 and Section 4.1.6)
Platen gap motor value (platen gap) adjustment (described in Section 4.1.7)
Bidirectional printing adjustment (described in Section 4.1.8)
Rev. B
ADJUSTMENT REQUIRED
DISASSEMBLY AND ASSEMBLY
3-59