Table of Contents
Advertisement
2.2 Aligning the Sewing Unit
2.3 Attaching the Yarn Stand
2.4 Connecting the Vacuum
The sewing unit can be aligned using the table leg. Care must be
taken to see that the table lies horizontal.
–
Place a water level on the stand.
–
Loosen screws 1 and 2.
–
Align the table top horizontal
–
Tighten screws 1 and 2.
–
Insert the yarn stand 4 into the drilled hole of the yarn stand holder 3.
–
Fasten the yarnstand with nuts and washers.
–
Mount and align the yarn spool holder and take-off arm as shown
in the illustration.
4
The vacuum of the feeding device fixes the aligned sewing material.
The feeding device is prepared for connection to an in-house vacuum
facility.
If no in-house vacuum facility exists, then the rotary blower and the
vacuum distributor available as optional equipment must be ordered.
–
Connect the suction hose of an in-house vacuum facility or a
vacuum distributor to the suction connexion 3.
1
2
3
2
5
Advertisement
Table of Contents
