DURKOPP ADLER 767 Instruction Manual page 25

Symbol Functions
A* Key for bar tack suppression or activation
B** Key for needle up/down or shift-key
in programming mode
C Abbreviation C for the code number
D Abbreviation F for the parameter number
E Program number in teach-in mode
F Seam-section number in teach-in mode
G Cut-out active
H Entry via keys disabled
I Error message
J Stitch-rate entry in teach-in mode
K Bobbin-thread monitor on.
Symbol flashes when the bobbin is running out
L Speed limit effective
M Right needle switched off
O Machine running
P Automatic speed effective
Q Left needle switched off
GB
23