V820 Operating Panel Key - DURKOPP ADLER 767 Instruction Manual

7.2 V820 Operating Panel Keys
Key Function
P Start or end programming mode
E Confirm a parameter-value change
+ Increase a displayed parameter value
- Decrease a displayed parameter value
1 Starting bar tack or starting stitch condensation
2 Seam stitch counting
3 Light barrier function
3 Auto foot lift after thread trimming
4 Ending bartack
5 Thread cutter/thread wiper
6 Auto foot lift on stop in mid-seam
Auto foot lift after thread trimming
7 Basic needle position
8 Bobbin thread monitor
9 Key function
0 Teach in / sew stored sewing program
22
Settings
single / double / off
forward / reverse / off
bright-dark / dark-bright/
off
on / off
single / double / off or
ending stitch condensation
thread cutter/thread cutter
and thread wiper / off
on / off
on / off
position 1 / position 2
on / off
programmable