Master Reset - Duerkopp Adler 669 Instruction Manual

11.5.6

Master reset

36
In order to ensure that the machine is properly positioned and that all
functions are correct, the following parameters must be verified or set
correctly:
·
Parameter F-111: set to 3000 rpm or less.
·
Parameter F-270: set to 6 (selection of positioning sensor)
·
Parameter F-272: calculate with the following formula:
Diameter of the motor belt pulley
Diameter of the machine belt pulley
A master reset will reset all parameter values to their default settings.
After a master reset, the machine-specific parameters must be
correctly specified again.
x 1000