33. Service Menu 579
33.1 Activating the Service Menu
33.2 Exiting the Service Menu
33.3 Multitest
54
In the service menu of the 579, several base settings of the automatic
sewing machine can be made and a number of test programs
conducted. No maintenance or final position tasks are to be
undertaken in the service menu.
Caution Risk of Injury!
Before beginning maintenance or final position work:
Turn the main switch off or bring the machine into the "Safe Stop" position.
When the sewing menu (Illustration above right) is displayed, press the
–
"F" key. A code prompt appears.
Enter the code"25483" with the arrow keys.
–
Press the "OK" key. R The service menu appears (Illustration
–
above left).
One can select the individual positions with the arrow keys.
One accesses the appropriate submenu by pressing the "OK" key.
The bottom line shows the time needed for the sewing of the last
–
buttonhole.
One can always move from a submenu to the next higher-level
–
menu with the "ESC" key.
When the service menu is displayed, press the "ESC" key.
–
The service menu is exited and the sewing menu appears.
The functions of the Multitest menu (input test, output test etc.) can be
accessed either from the main menu of the service menu by selecting
the menu items "Test Functions", "Multitest" or directly in the following
manner:
Turn the machine on.
–
At the display of the DÜRKOPP-ADLER logo, press the "F" key.
–
The code prompt appears.
Enter the code"25483" with the arrow keys and confirm with
–
the"OK" key. The test menu appears.
When one exits this menu by pressing the"ESC" key, one moves to
–
the sewing menu.