Setting Of The Cloth Clamp Pressure - Duerkopp Adler 579 Service Instructions Manual

11. Setting of the Cloth Clamp Pressure

18
Caution Risk of Injury!
Set the cloth clamp pressure only with the machine turned off.
Rule and Control
In order to avoid damage to the material or to keep thin material from
bunching during clamping, the cloth clamp pressure should be set as
low as necessary.
Thereby, care is to be taken that the sewing material is securely and
firmly clamped.
Correction
Turn the machine off.
–
Swing the machine into the upmost position.
–
Set the pressure at the regulator 1.
–
Lower the machine again.
–
1