Setting The Thread Monitor - Duerkopp Adler 579 Service Instructions Manual

33.10 Setting the Thread Monitor

60
The thread monitors for the looper thread and the needle thread can be
set in this menu. The values behind the needle thread and looper
thread mean the following:
0 = The respective thread monitor is turned off
>0 = The number of stitches after which the sewing cycle
is stopped because of thread breakage
When you are in the service menu, sequentially select the following
–
menu items with the arrow keys and the "OK" key:
- Configuration
- Machine
- Thread Monitor
The " Thread monitor " menu appears.
Select the thread monitor which is to be set with the arrow keys.
–
Press the "OK" key.
–
Set the desired value with the arrow keys.
–
Press the "OK" key.
–
The value for the thread monitor are now saved.