Loading The Program - Duerkopp Adler 530 Installation Instructions Manual

9.2.2

Loading the program

–
Turn the machine off at the main switch.
–
Insert the dongle 2 into the socket X110 (Dongle) 1 of the control
unit (see pictures).
–
Switch on the main switch. The Software will be loaded. The
loading process takes less than 60 seconds.
Important !
During the loading process do not remove the dongle and do not
switch off the machine (you will damage the software)!
–
The machine proceeds with a warm start after the software is
loaded.
–
The following screen appears.
INFORMATION
2
23