Mount The Oil Lines; Mount The Control Panel - Duerkopp Adler 530 Installation Instructions Manual

4.3 Mount the oil lines

4.4 Mount the control panel

12
10
–
Fasten the oil lines 8 and 9 in the oil pan by means of fitting 10.
The oil filter must be completely surrounded by the felt.
4
–
Screw the control panel 4 on the button sewing automat with
angle bracket 3.
Lay rubber washers between the mounting angle of the control
panel and the cast housing.
–
Run the connecting cable 2 under the table top through oil pan 1.
9 8
3 2 1