Oil Lubrication; Fill Up Oil - Duerkopp Adler 530 Installation Instructions Manual

8.

Oil lubrication

8.1 Fill up oil

Caution: Danger of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Be careful not to spill any oil.
Fill up the oil reservoirs exclusively with lubricating oil DA-10 or an
equivalent oil with the following specification:
–
Viscosity at 40° C:
–
Ignition point:
DA-10 can be bought at the sales points of
DÜRKOPP-ADLER AG under the following parts numbers:
250-ml-Container:
1-Litre-Container:
2-Litre-Container:
5-Litre-Container:
1
3
Oil reservoir for lubricating the button sewing automat
–
Fill up oil through drill-hole 1.
–
Check oil level in both inspection glasses 2 and 3.
The oil level must be above the red marking of both inspection
glasses.
2
10 mm /s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
2
2
19