Oil Lubrication; General - Duerkopp Adler 609 Service Instructions Manual

Hide thumbs Also See for 609:

Table of Contents

Oil lubrication

Caution Risk of Injury!

Oil can cause skin rashes.

Avoid longer skin contact.

After contact wash yourself thoroughly.

ATTENTION!

The handling and disposal of mineral oils is subject to legal

constraints.

Deliver used oil to an authorized reception point.

Protect your environment.

Take care not to spill any oil.

Oil the sewing machine exclusively with the lubricating oil DA-68 or

equivalent oil with the following specifications:

Viscosity at 40°C:

Flash point:

DA-68 can be purchased at sales branches of

DÜRKOPP ADLER AG, under the following part number:

1 liter container: 9047 000041

5 liter container: 9047 000042

Rule and control

The lubrication of the sewing machine head occurs via oil filling points

in the cast body. Additionally, the listed lubricating points are to be

supplied with oil.

At the latest after 40 hours of operation all lubricating points shown in

the following illustrations are to be lubricated.

–

Remove the head cover.

–

Supply all lubricating points with few drops of oil.

–

Attach the head cover again.

2/s

68 mm

212 °C

Table of Contents