Lubrication; Description; Refilling Oil; Multiple Oil Use - Duerkopp Adler 4181i-3 Instructions For Service Manual

Hide thumbs Also See for 4181i-3:

Table of Contents

All manuals and user guides at all-guides.com

3.13 Lubrication

From the oil tank (1) there issue three suction wicks. The wick (2)

lubricates the pin of the thread mechanism, the wick (3) lubricates the

needle mechanism and the wick (4) lubricates the stitch length

mechanism. The superfluous oil from the needle and thread mechanisms

is sucked off by the wick (5) and lubricates the shifting wedge of the

feeding clutch.

The hook has its own oil reservoir (6). The driving gear of the hook is

lubricated from oil tank (7).

For lubricating the machine oil Esso SP-NK 10, DA 10 is used or other

oil with the same quality. When putting the machine into operation,

each mechanism of the machine is to be lubricated with several drops

of oil. Oil is only refilled thereafter into the oil reservoirs using an oil

can into the holes in the oil level indicators.

The oil tanks (1, 2, 3) of the central distribution is to be filled up to the

mark max.

Oil which runs into the oil cup is collected in the collector (1) and may

be reused for refilling the oil reservoirs in the machine - see par.

3.13.2.

The oil collector (1) with the collected oil is uscrewed and the top part

of the oil can (2) which is added in the machine packing is screwed in.

Oil is then refilled into the reservoirs on the machine head and everything

is put into the original condition.

Table of Contents