Setting The External Input; Switching Ntsc/Pal Setting - Alpine CVA-1003R Owner's Manual

Other Useful Features

Setting the External Input

1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 3 button to select the
AUXILIARY setting mode. Press the Preset 3
button to select the desired external input, AUX
IN or NAV.IN.
• If the expansion BOX KCE-103 (not supplied) is
connected and the unit is set to Expand Box ON
(page 40), you can select AUX-1 IN/AUX-2 IN/
NAV.IN.
3
Press the g DN or f UP button to set ON/
OFF.
To set another setting, press the Preset 3 button
or another Preset button.
NOTE
When ∗ AUX IN ( ∗ ∗ AUX1 IN, ∗
1 1, 2
are set to ON, the EXTERNAL INPUT is displayed
during the source and SIMUL switching.
∗
1
When a DVD player or DVD changer is connected,
DVD player or DVD changer is displayed in the
display.
∗
2 When more than two DVD players or DVD changers
are connected, DVD player is displayed in AUX1 IN,
and DVD changer is displayed in AUX2 IN.
4
After setting is completed, press the SETUP
button to return to normal mode.
38
-EN
SETUP
g DN g g g g
f UP f f
f f
2 AUX2 IN) and NAV.IN
Preset 3
Preset 6
Preset 5

Switching NTSC/PAL Setting

1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 3 button to activate the
AUXILIARY setting mode. Press the Preset 3
button again to select AUX SIG.
When connecting the optional expansion box
(KCE-103V), you can select AUX1 SIG. or
AUX2 SIG.
3
Press the g DN or f UP button to set
NTSC/PAL.
To set another setting, press the Preset 3 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
NOTES
• When setting PAL, you cannot adjust the TINT.
• In the Navigation mode, the unit automatically
switches to NTSC.