Alpine CVA-1003R Owner's Manual page 55

When connecting with NVE-N055PS of the Alpine's Navigation System
CVA-1003R
RGB Convertor Cable
KCE-030N (Sold Separately)
When connecting with NVE-N055PV of the Alpine's Navigation System
CVA-1003R
1 Rear/Subwoofer Output RCA Connectors
RED is right and WHITE is left.
2 RCA Extension Cable (Sold Separetely)
3 RGB Cable (Included with Navigation)
4 System Switch
When connecting an equalizer or divider using Ai-
NET feature, place this switch in the EQ/DIV
position. When no device is connected, leave the
switch in the NORM position.
NOTE
Be sure turn the power off to the unit before changing the
switch position.
5 Ai-NET Connector
Connect this to the output or input connector of other
product equipped with Ai-NET.
6 Ai-NET Cable (Included with DVD video player)
7 RGB Input Connector
Connect to the RGB output terminal of the navigation
system.
Installation and Connections
VIDEO IN
GUIDE IN
REMOTE IN
REMOTE OUT
(White/Brown) (White/Brown)
DISP CONT IN DISP CONT OUT
(Yellow/Red)
(Yellow/Red)
GUIDE CONT IN GUIDE CONT OUT
(White/Green) (White/Green)
3
Connector Box
NTSC
8 AUX Video Input (AUX1) Connector
9 RCA Extension Cable (Included with DVD Video
! AUX Audio Input (AUX1) Connectors
" Remote Control Output Lead (White/Brown)
# Ai-NET Cable (Included with CD Changer)
$ Ai-NET Cable (Included with DVD Changer)
% RCA Extension Cable (Included with DVD
& RGB/NTSC Output Switch
To Video output terminal
Connector Box
To Guide output terminal
RCA Extension Cable
(Included with Navigation)
&
RGB
Connect the video output lead of a DVD video player
or DVD changer to this terminal.
Player)
(not used for this system)
Connect this lead to the remote control input lead.
This lead outputs the controlling signals from the
remote control.
Changer)
To display the picture of Navigation system on the
external monitor, place the switch in the NTSC Output
position.
(NVE-N055PS)
Navigation
(NVE-N055PV)
Navigation
53
-EN