Turning Sound Guide Function On Or Off; Setting The Clock Display - Alpine CVA-1003R Owner's Manual

Other Useful Features
Turning Sound Guide Function On
or Off
The Sound Guide function will give audible
feedback with a beep sound when a button on the
unit is pressed to acknowledge the receipt of the
signal from the button.
1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to activate the
GENERAL setting mode. Press the Preset 2
button again to select BEEP.
3
Press the g DN / f UP button to activate/
diactivate the Sound Guide mode. If you turn off
the Sound Guide mode, the sound guide beep
will not be produced when a button on the unit is
pressed.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.
36
-EN
CLOCK SETUP
TUNE
g DN g g g g
f UP f f
f f
Preset 2
Preset 3

Setting the Clock Display

1
When the monitor display is open, press and
hold the SETUP button for at least 2 seconds.
The SETUP screen appears.
2
Press the Preset 2 button to select GENERAL
setting mode. Press the Preset 2 button again to
select CLOCK DISP.
3
Press the g DN or f UP button to turn off
or on the clock display on the monitor display
respectively.
To set another setting, press the Preset 2 button
or another Preset button.
4
After setting is completed, press the SETUP
button to return to normal mode.