Table of Contents
Advertisement
Basic Operation
SOURCE
g DN
f UP
BASS C.
Setting the Bass Control
You can change the Bass Frequency emphasis
to create your own tonal preference.
1
Press the BASS C. button to turn on the Bass
setting mode.
2-1
Setting the Bass frequency:
Press the g DN or f UP button to select
the desired Bass centre frequency.
60Hz
80Hz
Emphasizes the displayed Bass frequency
ranges.
2-2
Setting the Bass Band Width (Q-Factor):
Press the BAND button to select the desired
Bass Band Width.
WIDE1
WIDE2
...........................
(Wide)
Changes the displayed frequency's band width
to narrow or wide.
2-3
Setting the Bass Level:
Press the 5 5 5 5 5 or 6 6 6 6 6 button to select the desired
Bass Level (-7~+7).
You can emphasize or weaken the bass
frequency.
NOTES
If no buttons are pressed within 5 seconds, the Bass
control setting will be turned off automatically.
The settings of the Bass Level will be individually
memorized for each source (FM, MW (LW) and CD)
until the setting is changed. Depending on the
connected devices, some functions and display
indications do not work.
6
-EN
2
1
BAND
TREBLE C.
SETUP
100Hz
200Hz
WIDE3
WIDE4
(Narrow)
Setting the Treble Control
You can change the Treble Frequency emphasis
to create your own tonal preference.
1
Press the TREBLE C. button to turn on the
Treble setting mode.
2-1
Setting Treble frequency:
Press g DN or f UP button to select the
desired Treble centre frequency.
10kHz
12.5kHz
Emphasizes the displayed Treble frequency
ranges.
2-2
Setting Treble Level:
Press the 5 5 5 5 5 or 6 6 6 6 6 button to select the desired
Treble Level (-7~+7).
You can emphasize the treble frequency.
NOTES
If no buttons are pressed within 5 seconds, the Treble
control setting will be turned off automatically.
The settings of the Treble Level will be individually
memorized for each source (FM, MW (LW) and CD)
until the setting is changed. Depending on the
connected devices, some functions and display
indications do not work.
15kHz
17.5kHz
Advertisement
Table of Contents
