Changing Audio Level Display Pattern; Setting The Aux Mode; Switching The Tuner Mode - Alpine CDM-7856R Owner's Manual

Changing Audio Level Display
Pattern
1
Press the SETUP button for at least 3 seconds.
2
Press g DN or f UP button to select the
DISP mode.
3
Press BAND button to switch the display pattern.
DISP1 DISP2
DISP1:
Lights the Volume indicator.
DISP2:
Lights the mode and value bars to show the
settings in the Bass engine display.
NOTE
The last mode set will remain in effect. The mode and
value bars light and show the Bass engine settings.
DISP OFF:
Turns off the light in Bass engine display.
If you set DISP OFF, the Volume indicator, Audio
Level indicator, and Bass engine displays are
not lit at all times.
To light them, press the BAND button to exit
DISP OFF.
4
Press the SETUP button to return to normal
mode.

Setting the AUX Mode

You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
the AUX mode.
DISP OFF
Volume indicator
Example settings:
Bass center frequency:
100 Hz
Bass band width: WIDE1
Bass level: - 6
3
Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4
Press the SETUP button to return to normal
mode.
5
To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
TUNER CD
NOTE
When AUX ON is selected, a CD Changer cannot be
used.

Switching the Tuner Mode

The CDM-7859R/CDM-7858R/CDM-7856R
incorporates the MAX TUNE Pro for the highest
quality tuner audio. Moreover, you can choose
between two settings to suit your own personal
sound preferences usage.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the g DN or f UP button to select
NORMAL.
3
Press the BAND button to switch the TUNER
mode.
HI-FI NORMAL
NORMAL: Standard setting
HI-FI: Sound quality priority setting
STABLE: Noiseless priority setting
NOTES
The initial setting at the factory is "NORMAL."
If you find the sound is very noisy while listening to
the tuner in the HI-FI mode, we recommend you
change to the NORMAL mode.
4
When the setting is completed, press the
SETUP button to return to the normal mode.
AUX
FR
ES
DE
STABLE
IT
SE
7
-EN