Cleaning the Rollers Inside the Main Unit
If the rollers inside the main unit are dirty, the copy quality will deteriorate. In this
case, you can clean the rollers using the <ADJUST/CLEAN> setting from the
<ADDITIONAL FUNCTIONS> menu.
NOTE
1
dditional Functions
2
5
Set
3
4
5
Set
5-16
Routine Cleaning
While the In Use/Memory indicator is lit, the machine does not clean the roller even
if you perform the procedure below (imageRUNNER 1670F model only).
Press [Additional Functions].
Press [4 ] or [ e] to select <ADJUST/CLEAN> ➞ press [Set].
Press [4 ] or [ e] to select <ROLLER CLEANING>.
ADJUST/CLEAN
1.ROLLER CLEANING
Set letter size paper in the stack bypass.
IMPORTANT
You must use a plain sheet of letter size paper.
Press [Set].
The machine begins cleaning the rollers.
NOTE
It takes about three minutes to clean the roller.