Replacing The Toner Cartridge - Canon IMAGERUNNER 1610 Reference Manual

Hide thumbs Also See for IMAGERUNNER 1610:
Table of Contents

Advertisement

Replacing the Toner Cartridge

This section describes how to remove the used toner cartridge and replace it with
a new one.
When the message <TONER LEVEL LOW> or <TONER EMPTY> appears in the
LCD, replace the toner cartridge.
WARNING
Do not throw the toner cartridge into open flames, as this may cause the toner
inside the toner cartridge to ignite and result in burns or a fire.
CAUTION
When you remove the toner cartridge from the machine or the sealing tape
from the toner cartridge, handle it carefully. Otherwise, the toner may scatter
and get into your eyes or mouth. In this case, rinse out your eyes or mouth
thoroughly with water immediately and consult a doctor.
IMPORTANT
There are some areas inside the machine that are subject to high-voltages and high-
temperatures. Take adequate precautions when performing internal inspections to
avoid burns or electrical shock.
NOTE
When removing the toner cartridge, take care not to allow the toner to come into
contact with your hands or clothing. If they become dirty, wash them immediately
with cold water. Washing with warm water will set the toner and make it impossible
to remove the toner stains.
1
Open the toner supply cover.

Replacing the Toner Cartridge

5
5-19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imagerunner 1630Imagerunner 1670f

Table of Contents