Table of Contents
Advertisement
3
4
5
5-12
Loading Paper
Run a pen or other rounded object along the back flaps to
flatten them.
The flaps should not bulge more than 0.2" (5 mm).
Insert the stack of envelopes into the stack bypass , and
adjust the slide guides to fit the size of the envelope .
Position the envelopes with the print side up (flaps should not be visible) and
•
load the envelope so that the right edge (stamp side) feeds first in the stack
bypass.
If the envelope to be loaded has a flap on the short edge, this edge must enter
•
the machine first. Not loading it this way may result in paper jams.
Make sure the stack does not exceed the paper limit guide.
•
2
1
The machine is now ready to print.
Flap
1
2
Hide quick links:
Advertisement
Table of Contents
