Table of Contents
Advertisement
REC. PAPER JAM
SLIDE PLATEN LEFT
Cause
There is a paper jam.
Remedy
Clear the paper jam and reload paper in the paper drawer or stack bypass. (See
"Clearing Paper Jams," on p. 6-2.)
REMOVE DOC. ON GLASS
Cause
A document has been left on the platen glass.
Remedy
Remove or change the document from the platen glass.
SCANNING ↔ MAKING SPACE IN MEM ↔ PLEASE WAIT
Cause
Memory is getting low during scanning because the document has many graphics or
photos.
Remedy
When memory space becomes available as printing continues, scanning resumes
automatically.
START AGAIN
Cause
The paper in the paper drawer has run out, the toner has run out, paper jams have
occurred, or the paper size setting is wrong while the report is printing.
Remedy
After loading paper in the paper drawer, replacing the toner cartridge, clearing jams, or
specifying the correct paper size, print the report again.
STOP KEY PRESSED
PRESS SET KEY
Cause
The document has stopped in the ADF because you pressed [Stop/Reset] while
scanning.
Remedy
Press [Set] to make the document come out automatically.
SUPPLY REC. PAPER
Cause
No paper is loaded in the paper drawer or stack bypass.
Remedy
Load paper in the paper drawer or stack bypass. Make sure the paper stack in the
paper drawer or stack bypass does not exceed the paper limit guides. If you run out of
paper while making copies, do not load a different paper size. (See "Loading Paper," on
p. 5-5.)
List of LCD Display Messages
6
6-11
Hide quick links:
Advertisement
Table of Contents
