Recording To A Specific Track - Yamaha YPT-330 Owner's Manual

3
Stop recording.
Pressing the [START/STOP] button stops recording and writes the data to the
User Song. (A "Writing!" message is shown.)
To playback the newly recorded performance, press the [START/STOP] button.
In order to record with the Style, turn auto accompaniment to on (see Step 2
on page 19), and then record according to the instructions.
In order to record only your performance, turn auto accompaniment to off
and record according to the normal steps.

Recording to a Specific track

The User Songs are organized into two tracks: Track 1 and Track 2. You can specify the track you want to record
to.
About track recording
If you start recording by specifying a track, the track will be overwritten (existing
data in the track is deleted and replaced with the new recording).
Data that can be
recorded to Track 2
Style playback* (including
chord changes) or your own
keyboard performance
* When playing
the Style
Only your keyboard performance can be recorded to Track 1. Either a Style or your
performance can be recorded to Track 2, resulting in a User Song like that depicted
below.
User Song
Track 2
Style
performance
(The "ACMP ON" lights.)
(The "ACMP ON" is unlit.)
User Song
Data that can be
recorded to Track 1
Your own keyboard
performance only
Track 1 Track 2
Your own Your own
keyboard keyboard
performance
Record Your Own Performance
Recording to the specified track
User Song
Track 1
Your own
keyboard
performance
PSR-E333/YPT-330 Owner's Manual
NOTICE
• Never attempt to turn the
power off when a "Writ-
ing!" message is shown in
the display. Doing so can
damage the flash memory
device and result in a loss
of data.
NOTE
• Use the Musicsoft Down-
loader to backup the User
Songs to a computer (page
45).
NOTE
• Record following the steps
in the previous page, and
your performance will be
recorded to Track 1 and the
Style (if you are playing one)
will be recorded to Track 2.
NOTE
• You cannot record the
Reverb Level, metronome
click, or the Transpose and
Tuning settings.
• The following settings and
buttons cannot be changed,
or if changed, the new set-
tings cannot be recorded if
entered during the recording
process.
ACMP ON/OFF, Split Point,
Reverb Type, Chorus Type,
Harmony Type, [FUNC-
TION] button, [PORTABLE
GRAND] button.
37