LS 1000 Product Reference Guide: Chapter 4, Programming the LS 1004
Convert UPC-E to UPC-A
Select this option to convert UPC-E (zero suppressed) decode data to UPC-A format
before transmission. After conversion, data follows UPC-A format and is affected by
UPC-A programming selections (e.g., Preamble, Check Digit).
Do Not Convert
Convert UPC-E to UPC-
UPC-E to UPC-A
A
EAN Zero Extend
This parameter adds five leading zeros to decoded EAN-8 symbols to make them
compatible in format to EAN-13 symbols.
Enable EAN Zero Ex-
Disable EAN Zero Ex-
tend
tend
4-14