LS 1000 Product Reference Guide: Chapter 1, Introduction and Setup
IBM 468X/9X
Plug the SDL modular connector at the end of the selected Synapse "Smart" cable into
the appropriate port (5B, 9B, 9C, 9E, or 17). Check that the connection is secure. To
install an LS 1004 on an IBM 468X/469X host:
1.
Connect a synapse adaptor cable to the scanner, using the procedure described in
"Installing the Cable
2.
Plug the other end of the adaptor cable into the synapse cable's female connector.
Spark
" .
Figure 1-5. Typical System Configuration
1-9