Table of Contents
Advertisement
LS 1000 Product Reference Guide: Chapter 3, Maintenance and Specifications
Standard Use
Beeper Sequence
1 Beep - short high tone
4 Beeps - long low tone
4 Beeps - short high tone
3 Beeps - short high tone
Parameter Menu Scanning
1 Beep - short high tone
1 Beep - warble sound
2 Beeps - long low tone
Table 3-5. Beeper Indications
A bar code symbol was decoded (if decode beeper is
enabled).
A transmission error has been detected in a scanned
symbol. The last data scanned was lost. Scan the last
data again.
Low power indication; no further scanning is possible.
Change or recharge battery.
Power-up (continuous power mode only)
Appropriate menu within the scanning sequence has
been read
Parameter value entered successfully
Parameter not entered, or incorrect sequence
performed. Scan CANCEL and restart the scanning
sequence.
3-13
Indication
Advertisement
Table of Contents
