Removal And Replacement Procedures; Warnings And Cautions - HP Xw4550 - Workstation - 2 GB RAM Technical Reference Manual

Hp xw4550 workstation - service and technical reference guide
Hide thumbs Also See for Xw4550 - Workstation - 2 GB RAM:
Table of Contents

Advertisement

4

Removal and replacement procedures

This chapter describes removal and replacement procedures of most internal components of the
workstation, and includes the following sections:
Warnings and cautions on page 49
Service considerations on page 50
Customer Self-Repair on page 55
Predisassembly procedures on page 55
System board components on page 56
Steps for removing and replacing components on page 57
Product recycling on page 96

Warnings and cautions

WARNING!
of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce
the risk of injury from a hot component, enable the surface to cool before touching.
WARNING!
of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed
area marked with this symbol.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
workstation setup, posture, health, and work habits for computer users, and provides important electrical
and mechanical safety information. This guide is located at
documentation CD (if one is included with the product).
WARNING!
be lifted by two persons to avoid personal injury due to product weight.
CAUTION:
beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal
object.
ENWW
Any surface or area of the equipment marked with this symbol indicates the presence
Any surface or area of the equipment marked with this symbol indicates the presence
To reduce the risk of electric shock or damage to your equipment:
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
If a product is shipped in packaging marked with this symbol,
Static electricity can damage the electronic components of the workstation. Before
http://www.hp.com/ergo
, the product must always
Warnings and cautions
and on the
49

Advertisement

Table of Contents
loading

Table of Contents