Table of Contents
Advertisement
PCI IRQ Settings (G6 servers)
These options configure the legacy IRQ for embedded and slot-based PCI/PCIe devices. Multiple devices
can share an IRQ.
The PCI Devices menu displays the configuration settings of the PCI devices installed in the server and
allows you to modify the IRQ. Multiple PCI devices can share an interrupt.
To disable a device, select the device and press the Enter key. A menu is displayed with options to
change the IRQ, as well as to disable the device.
PCI Device Enable/Disable (G6 servers)
These options enable and disable embedded devices. Disabling devices reallocates the resources
(memory, I/O, and, in some cases, option ROM space) that would normally be allocated to the device,
and in some cases, saves the power that would be allocated to the device.
NOTE:
PCI devices that have not been modified are subject to change during reboot.
IMPORTANT:
2000 or Windows Server® 2003, disabling a single PCI controller also disables all controllers
on the same PCI bus. To avoid disabling other controllers on the bus, remove the single PCI
controller.
Only IRQs that are modified in RBSU retain the change during the next reboot. IRQs on
When the PCI Hot Plug driver is installed on servers with Microsoft® Windows®
RBSU menu (HP ProLiant G6 servers or server blades) 34
Advertisement
Table of Contents
