Measuring Resistance - UNI-T UT20B Operating Manual

Model UT20B: OPERATING MANUAL
Measurement Operation (9)
F. Measuring Resistance
Warning
To avoid damages to the Meter or to the devices under test, disconnect circuit
power and discharge all the high-voltage capacitors before measuring resistance.
The resistance measurement positions are: 200 , 2000 , 20k , 200k and 2000k .
To measure resistance, connect the Meter as follows:
1. Set the rotary switch to an appropriate measurement position in
2. Connect the test leads across with the object being measured.
The measured value shows on the display.
19
range.