Table of Contents
Advertisement
To set the box style
1.
Press the
key.
2.
Select a frame style and then press
On multi-line labels, all lines are underlined. In box style
mode, all lines are enclosed in one box style.
To select a text background
1.
Press the
key.
2.
Select
Text Background and then press
The first memory location is displayed.
3.
Use the arrow keys to select the stored text you wish to use
as a background and press
Text on page 14.
Creating Multi-Line Labels
The number of lines you can print on a label depends on the
width of the label you are using:
•
Maximum of five lines on 19 mm and 24 mm labels
•
Maximum of three lines on 9 mm and 12 mm labels
•
Maximum of one line on 6 mm labels
To create a multi-line label
1.
Type the text for the first line, and press
A new line character
in the display, but will not print on the label.
2.
Type the text for the second line.
The display shows the line on which you are currently
entering text. The example below indicates that the second
line is the current line on the label.
3.
Use the arrow keys to move between lines.
Using Mixed Formats
You can apply different fonts and format styles to the text on a
label by inserting format breaks to divide the label into blocks
or sections of text. Each section is separated by a format break.
You can add two format breaks, allowing you to apply three
separate formats to a label.
10
H
.
H
.
H
. Refer to Storing Label
Enter.
is placed at the end of the first line
Alignment, underline, box styles, and background patterns
cannot be mixed on a label. These styles are common to the
entire label.
To add a format break
1.
Enter and format text for the first section.
2.
Press
.
Preview
Insert
Insert Format Break and press
3.
Select
Continue entering and formatting text for the next section of
the label.
Using Tabs
You can add tabs to a label to align text on multi-line labels.
Tabs are left justified and the default spacing is 50 mm.
To change the tab spacing
1.
Press
.
Settings
2.
Select
Set Tab Length and press
3.
Use the up and down arrow keys to increase or decrease the
tab setting, and then press
To insert a tab
1.
Enter your text.
2.
Press the
key and continue entering text.
æ
Using Symbols and Special
Characters
Symbols and other special characters can be added to labels.
Adding International Characters
The label maker supports the extended Latin characer set
using RACE technology. Similar to using a mobile phone
keypad, if you type a letter multiple times within a very short
time, you will scroll through variations on that letter.
For example, if French is selected as the language and you
repeatly press the letter a, you will see a à á â ã ä å and so on
through all the variations available. The character variations
and the order in which the variations appear depend on the
language you have selected to use.
H
.
H
.
H
.
Hide quick links:
Advertisement
Table of Contents
