Adjusting The Print Contrast; Caring For Your Label Maker - Dymo LabelManager 120P User Manual

Adjusting the Print Contrast

You can adjust the print contrast to fine tune the print quality of your label.
To set the contrast
1. Press .
Contrast and press }.
2. Select
3. Use the arrow keys to select a contrast setting between
and 5 (more contrast), and press }.

Caring for Your Label Maker

Your label maker is designed to give you long and trouble-free service, while
requiring very little maintenance. Clean your label maker from time to time to
keep it working properly. Clean the cutter blade each time you replace the tape
cassette.
To clean the cutter blade
1. Remove the tape cassette.
2. Press and hold down the cutter lever to
expose the cutter blade. See Figure 6.
3. Use a cotton ball and alcohol to clean both
sides of the blade.
è
The cutter blade is extremely sharp. Use
caution when cleaning.
To clean the print head
1. Remove the tape cassette.
2. Remove the cleaning tool from inside the tape compartment cover.
3. Gently wipe the padded side of the tool across the print head. See Figure 6.
Print head
1 (less contrast)
Cutter button
Figure 6
13