Duerkopp Adler 275 Instruction Manual page 6

Contents
7. Operating and adjusting the DC1500/DA220C direct-current
positioning actuator . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1 DA220C control operating and display elements . . . . . . . . . . . .
7.1.1 Changing parameter values at operator level with the DA220C control . . .
7.1.1.1 Calling and changing operator-level parameters one after the other
with the DA220C control . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.1.2 Calling and changing operator-level parameters directly with the
DA220C control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.2 Reducing the maximum speed with the DA220C control . . . . . . . .
7.1.3 DA220C control operator-level parameter list . . . . . . . . . . . . . .
7.1.4 Changing technician-level and manufacturer-level parameter values . .
7.1.5 Setting positions with the DA220C control . . . . . . . . . . . . . . . .
7.1.6 Setting machine-specific parameters with the DA220C control . . . .
7.1.6.1 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.6.2 Autoselect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1.6.3 Table of DA220C control machine-specific parameters . . . . . . . . .
7.1.7 Master reset with the DA220C control . . . . . . . . . . . . . . . . . . .
7.1.8 Condition and error messages . . . . . . . . . . . . . . . . . . . . . . .
7.2 V810 operating panel (optional equipment). . . . . . . . . . . . . . . .
7.2.1 Operating and display elements on the V810 operating panel . . . . .
7.2.2 Key functions on the V810 operating panel . . . . . . . . . . . . . . . .
7.2.3 Meaning of the symbols on the V810 operating panel . . . . . . . . .
7.2.4 Changing parameter values at operator level . . . . . . . . . . . . . .
7.2.5 Reducing the maximum speed . . . . . . . . . . . . . . . . . . . . . . .
7.2.6 Changing technician-level and manufacturer-level parameter values
with the V810 operating panel . . . . . . . . . . . . . . . . . . . . . . .
7.2.7 Setting positions with the V810 operating panel . . . . . . . . . . . . .
7.2.8 Setting machine-specific parameters with the V810 operating panel . . .
7.2.9 Master reset with the V810 operating panel . . . . . . . . . . . . . . .
7.2.10 Condition and error messages on the V810 operating panel. . . . . .
7.3 V820 operating panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3.1 Operating and display elements on the V820 operating panel . . . . .
7.3.2 Key functions on the V820 operating panel . . . . . . . . . . . . . . . .
7.3.3 Meaning of the symbols on the V820 operating panel . . . . . . . . .
7.3.4 Changing parameter values at operator level . . . . . . . . . . . . . .
7.3.5 Reducing the maximum speed . . . . . . . . . . . . . . . . . . . . . . .
7.3.6 Quick information and quick settings entry (HIT) . . . . . . . . . . . .
7.3.7 Changing technician-level and manufacturer-level parameter values
with the V820 operating panel . . . . . . . . . . . . . . . . . . . . . . .
7.3.8 Setting positions with the V820 operating panel . . . . . . . . . . . . .
7.3.9 Setting machine-specific parameters with the V820 operating panel . . .
7.3.10 Master reset with the V820 operating panel . . . . . . . . . . . . . . .
7.3.11 Condition and error messages on the V820 operating panel. . . . . .
7.3.12 Seam programming with the V820 operating panel . . . . . . . . . . .
page:
24
25
26
26
27
27
28
29
30
32
32
32
32
33
34
35
35
35
36
37
37
38
39
40
40
40
41
41
41
43
44
44
44
45
46
47
47
48
48