Dual XC4100 Installation & Owner's Manual page 2

XC4100 INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from
direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
Getting Started
• Insert the supplied keys into the slots as shown, and slide the unit out of the mounting
sleeve.
• DIN mounting procedure:
Install mounting sleeve into radio opening, bending tabs to secure.
• 2-Shaft mounting procedure:
Remove knobs, faceplate and DIN mounting adapters from unit.
Install unit into kit or radio opening from behind. Adjust rear shaft nuts to
correct depth. Install faceplate and knobs.
• Connect wiring harness and antenna.
Consult a qualified technician if you are unsure.
• Certain applications may require an installation kit and/or wiring harness adapter (sold
separately).
• Test for correct operation.
2