Dual XD28BT Installation & Owner's Manual

Dual XD28BT Installation & Owner's Manual

Am/fm receiver with bluetooth
Hide thumbs Also See for XD28BT:

Advertisement

XDM27BT
INSTALLATION/OWNER'S MANUAL
AM/FM Receiver with Bluetooth

Advertisement

Table of Contents
loading

Summary of Contents for Dual XD28BT

  • Page 1 XDM27BT INSTALLATION/OWNER'S MANUAL AM/FM Receiver with Bluetooth...
  • Page 2 XDM27BT INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started •...
  • Page 3: Wiring Diagram

    XDM27BT INSTALLATION Wiring Diagram FUSE When replacing the Antenna fuse, make sure new Connector fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The unit uses one 10 amp ATC fuse located beside the wiring connector.
  • Page 4: Control Locations

    XDM27BT OPERATION Control Locations 11 12 13 Preset 1 / Play/Pause Reset Preset 2 / Intro Bluetooth Talk Preset 3 / Repeat Auxiliary Input Power / Mute USB Port Mode AS/PS Tune / Track Down Display Tune / Track Up Preset 6 / Folder Up Voice Activation Preset 5 / Folder Down...
  • Page 5: General Operation

    XDM27BT OPERATION General Operation Press the button to turn the unit on. Press again to Power On/Off turn the unit off. Press MODE to select between Radio, USB, Auxiliary Input Changing Modes and Bluetooth. Modes of operation are shown in the display. Adjust volume using the volume knob (00-40).
  • Page 6 Press and hold AS/PS for more than 2 seconds to store Automatically Store 18 FM stations and 12 AM stations automatically. Press AS/PS to recall each preset staion that stored in the Preset Scan Stations memories in each band. (Dual iPlug P2 APP Only)
  • Page 7: Usb Operation

    XDM27BT OPERATION USB Operation To play MP3 files, insert a USB device containing MP3 files. Playing MP3 Files Press TUNE to skip to the beginning of the next track. Track Select Press TUNE to skip to the beginning of the previous track.
  • Page 8: Bluetooth Operation

    Device from your Bluetooth device. Refer to the owner’s manual for your device for more details. The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.
  • Page 9: Voice Activation

    XDM27BT OPERATION Dual iPlug P2 Smart App Remote Control Use the Dual iPlug P2 Smart App Remote Control on an Apple or Android smartphone to control the receiver via Bluetooth. Change the mode, station, song, volume, and settings directly from your smartphone without being in the receiver's line-of-sight.
  • Page 10: Limited One Year Warranty

    2. If you require service during the the original purchase. warranty period, you must carefully pack the product (preferably in the Dual Electronics Corp. agrees, at our original package) and ship it by prepaid option, during the warranty period, transportation with a copy of the original...
  • Page 11: Troubleshooting

    XDM27BT OPERATION Troubleshooting Problem Cause Action Yellow wire not connected or incorrect Check connections for proper voltage Red wire not connected or voltage (11~16VDC) Unit will not turn on incorrect voltage (no power) Black wire not connected Check connection to ground Fuse blown Replace fuse Speaker wires not connected...
  • Page 12: Specifications

    XDM27BT OPERATION Specifications Tuning range: FM Tuner 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: >30dB Frequency response: 30Hz-13kHz Tuning range: AM Tuner 530kHz-1710kHz Usable sensitivity: <42dBu Frequency response: 30Hz-2.2kHz Speaker output impedance: General 4 ohms Line output voltage: 2 Volts RMS Dimensions:...
  • Page 13: Fcc Compliance

    XDM27BT OPERATION FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 14 Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2020 Dual Electronics Corp. All rights reserved. Other trademarks and trade names are those of their respective owners. NSA0420-V01...

This manual is also suitable for:

Xdm27bt

Table of Contents