Advertisement
baSiC TroublEShooTing
1. problem:
no display/partial display/unit will not turn on
Solution:
A. Make sure the unit is plugged into a functioning wall
outlet.
B. Check the power connection at the front of the unit.
Connection should be secure and undamaged. Replace
the unit adapter or connection if either are damaged.
C. Check data cable integrity. All cable wires should
be intact. If any are visibly crimped or cut, replace the
cable.
D. Check data cable connections/orientation. Insure the
cable is connected securely and oriented properly. The
small latch on the connector should line up and snap
into place.
E. Check console display for damage. Check for
any visual sign that the console display is cracked or
otherwise damaged. Replace the console if damaged.
F . Check console display. If the console only has a
partial display and all connections are OK, replace the
computer.
advanced Troubleshooting
If any steps above do not resolve problems, proceed to
ADVANCED TROUBLESHOOTING, problem a1.
3
Advertisement
Troubleshooting
