HP Compaq MultiSeat ms6005 Hardware Reference Manual page 69

7.
Rotate up the internal drive bay housing to access the memory module sockets on the system
board.
Figure 3-8 Rotating the Drive Cage Up
8.
Open both latches of the memory module socket (1), and insert the memory module into the socket
(2).
Figure 3-9
Installing a DIMM
NOTE: A memory module can be installed in only one way. Match the notch on the module with
the tab on the memory socket.
Populate the black DIMM sockets before the white DIMM sockets.
For maximum performance, populate the sockets so that the memory capacity is spread as equally
as possible between Channel A and Channel B. Refer to
for more information.
Populating DIMM Sockets on page 59
Installing Additional Memory
61