Setting A Pause Time Limit; Setting A Cool Down Time Limit - Precor EFX 532i Owner's Manual

Setting a Pause Time Limit

You can limit how long a user can pause while exercising on the
equipment by entering a time between 1 and 120 seconds (two
minutes). For example, if you set a pause time limit of 60 seconds,
the display automatically resets to the Precor banner if no
movement is detected and no key press occurs for one minute.
Important: The optional power adapter must be connected on
self-powered equipment to establish a definitive pause time limit.
If the optional power adapter is not attached and the rate of
motion drops below the minimum requirements, the equipment
begins its 30-second shutdown, effectively eliminating pause
mode.
To set a maximum pause time:
1. At the
S E T M A X P A U S E T I M E
navigational arrow keys to select a time limit between 1 and 120
seconds (two minutes).
2. Press OK to accept the displayed setting and move to the next
feature.
Product Owner's Manual: Club Features
prompt, press OK. Use the

Setting a Cool Down Time Limit

Use this setting to select the maximum amount of time the machine
will remain in the cool down mode. Cool down time is the period of
time following the completion of a program when the user
exercises at a reduced work rate.
To set a cool down time:
1. At the
S E T C O O L D O W N T I M E
2. Use the navigational arrow keys to display the available time
limits and choose a time between 0 and 5 minutes.
Note: The default setting is 5 minutes.
3. Press OK to accept the displayed setting and move to the next
feature.
prompt, press OK.
23