Electrical Recommendations: 120 V And 240 V Treadmills; Obtaining Service - Precor EFX 532i Owner's Manual

Electrical Recommendations: 120 V and
240 V Treadmills
Note: This is a recommendation only. NEC (National Electric
Code) guidelines or local region electric codes must be followed.
You should have received a power cable that meets your local
electrical code requirements along with the equipment. Precor
treadmills must be connected to a 20 amp individual branch circuit
that can be shared only with one PVS. If you need additional help
with the power connections contact your Precor authorized dealer.
Important: An individual branch circuit provides a hot conductor
and neutral conductor to a receptacle. The conductors must not
be looped, "daisy-chained", or connected to any other conductors.
The circuit must be grounded according to NEC guidelines or
local region electric codes.
Product Owner's Manual: Important Safety Instructions
Figure 2: North American 120-volt, 20-amp power receptacle
Figure 3: North American 240-volt, 20-amp power receptacle

Obtaining Service

Do not attempt to service the equipment except for maintenance
tasks. If any items are missing, contact your dealer. For more
information regarding customer support numbers or a list of Precor
authorized service centers, visit the Precor web site at
http://www.precor.com.
7