Installation; Unpacking - Electrolux EWG 12450 W User Manual

Installation

Unpacking

All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it's back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With the supplied spanner unscrew
and remove the central rear bolt A.
Slide out the relevant plastic spacer.
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D and refit the
six smaller bolts C.
installation electrolux 31