Table of Contents
Advertisement
Product Description
SECTION 1
1.1 Product Features
1.2 Compatible Panel
1.3 Specifications
8
Product Description
The DACT-UD Digital Alarm Communicator/Transmitter transmits system status to
UL listed Central Station Receivers via the public switched telephone network. The
communicator mounts to the FACP main circuit board inside the panel cabinet and is
capable of reporting 636 points or 99 zones.
•
Dual telephone lines
•
Dual telephone line voltage detect
•
Mounts inside the control panel
•
Extensive transient protection
•
Individual LEDs for
Kissoff - green LED
Primary Phone Line Active - red LED
Secondary Phone Line Active - red LED
•
Communicates vital system status including:
Independent zone/point alarm
Independent zone/point trouble
Independent zone/point supervisory
AC power loss
Low battery
Earth fault
System off normal
12 or 24 hour test signal
Abnormal test signal per UL requirements
Annunciation at control panel of DACT troubles including loss of phone lines,
communication failure with either Central Station, total communication failure
The DACT-UD has been designed to be compatible with the following control panel:
•
MS-9600
DC Power - J1 Connector
Current draw in standby and alarm:
Standby = 0.100 amps
Alarm = 0.132 amps (communicating)
Product Features
DACT-UD PN 51899:B1 1/25/05
Advertisement
Table of Contents
