Primary Phone; Secondary Phone - Fire-Lite DACT-UD Manual

Programming for DACT-UD
ON BOARD DACT
1=ENABLED

2=PRIMARY PHONE

3=SECONDARY PHONE

On Board DACT Screen #1
18
3.1.1.2 Primary Phone
Press 2 while viewing On Board DACT Screen #1 to program the type of primary
phone line being connected to the DACT. The following screen will be displayed:
ON BOARD DACT
PRIMARY PHONE LINE
1=TYPE
Primary Phone Line Screen
To select the type, press 1 while viewing the Primary Phone Line screen. The
following screen will be displayed:
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 62/38
Primary Phone Type Screen
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break
ratio of 67/33 or 3 to select Rotary dialing with a make/break ratio of 62/38.
3.1.1.3 Secondary Phone
Press 3 while viewing On Board DACT Screen #1 to program the type of secondary
phone line being connected to the DACT. The following screen will be displayed:
ON BOARD DACT
SECONDARY PHONE LINE
1=TYPE
Secondary Phone Line Screen
To select the type, press 1 while viewing the Secondary Phone Line screen. The
following screen will be displayed:
PHONE LINE
1=TOUCHTONE
2=ROTARY 67/33
3=ROTARY 62/38
Secondary Phone Type Screen
Press 1 to select Touchtone dialing, 2 to select Rotary dialing with a make/break
ratio of 67/33 or 3 to select Rotary dialing with a make/break ratio of 62/38.
Programming the MS-9600 Fire Alarm Control Panel
TOUCHTONE
TOUCHTONE
DACT-UD PN 51899:B1 1/25/05