Bit Image Commands; Esc * M N1 N2 [ D ] K - Citizen CT-S300 Command Reference Manual

2.2.5 Bit Image Commands

ESC * m n1 n2 [ d ] k

[Function] Specifying the bit image mode
[Code] <1B>H<2A>H<m>H<n1><n2>[<d>]k
[Range] m = 0, 1, 32, 33
0
0
0
k = n1 + 256
k = (n1 + 256
[Outline] • According to the number of dots specified in "n1", "n2", specify the bit image of
• The number of dots printed is divided by 256, whose quotient is taken as n2 and
• When bit image data have been input in excess of dot positions that can be printed
• "d" is bit image data. Bits to be printed are specified as "1" and those not as "0".
• The bit image modes specified by "m" are shown as follows:
[Caution] • When the value of "m" is out of the above range, the data following after "n1" is
• After completion of bit image printing, the printer returns to normal data processing
n1 255
n2 2
d 255
n2 (m = 0, 1)
n2) 3 (m = 32, 33)
mode "m".
residual as "n1". The total number of dots printed in the horizontal direction is
equal to n1 + (256 n2).
on one line, the excess data are discarded.
m Mode
0 8-dots single density
1 8-dots double density
32 24-dots single density
33 24-dots double density
processed as normal printing data.
mode.
Vertical Direction
No.
of Dots
8
8
24
24
— 45 —
Horizontal Direction
Dot Dot
Density Density
67 DPI 101 DPI
67 DPI 203 DPI
203 DPI 101 DPI
203 DPI 203 DPI
Max. No.
of Dots
288
576
288
576