Controlling Zones 2-4 From The Remote Location; Setup; Menu Basics; Navigation Buttons - Rotel RSX-1058 Owner's Manual

pressing an INPUT button, you can also
push the +/– buttons on the remote to step
through the inputs.
3. Following 10 seconds with no commands,
the RSX-1058 reverts to normal opera-
tion.
To change Zone 2, 3 or 4 volume:
1. Press the front panel SEL or remote REC
button repeatedly until the desired zone
status appears in the OSD and front panel
displays.
2. Within 10 seconds, adjust the volume con-
trol on the front panel or remote to change
the output level for the selected zone. The
new setting appears in the display.
3. Following 10 seconds with no commands,
the RSX-1058 reverts to normal opera-
tion.
Controlling Zones 2–4 from the
Remote Locations
With a properly configured IR repeater sys-
tem, you have full control of Zones 2–4 using
an RR-1060 remote from the zone locations.
You can select and operate a source, adjust
the volume, and turn the relevant Zone on or
off. Whatever commands you send from the
RR-1060 will change ONLY the Zone for the
location you are in, just as if you were con-
trolling a totally independent audio system
in that room. These changes will have no ef-
fect on the main listening room.
To turn the Zone on or off, press the ON/OFF
buttons on the remote. To adjust the volume
in the Zone, press the VOLUME buttons on
the remote. To select a different analog input
source, press one of the DEVICE/INPUT but-
tons on the remote. You can also use the +/–
buttons to step through the source inputs.
All OFF command: A long press of the
OFF button (more than 3 seconds) from any
room, sets all rooms to standby, i.e., the RSX-
1058 goes to standby completely.
NOTE: The volume adjustment is only available
if the Zone 2–4 outputs are configured to use
VARIABLE levels. With FIXED levels, the volume
control for Zones 2–4 is disabled.
37

SETUP

The RSX-1058 features two types of infor-
mation displays to help operate the system.
The first consists of simple status displays that
appear on the TV screen and/or front panel
display whenever primary settings (Volume,
Input, etc.) are changed. These status displays
are self-explanatory.
A more comprehensive ON-SCREEN DIS-
PLAY (OSD) menu system is available at any
time by pressing the MENU/OSD button on
the remote. These OSD menus guide you
through the configuration and setup of the
RSX-1058. In general, the settings made in
the configuration process are memorized as
default settings and need not be made again
for normal operation of the unit.
The OSD menus can be configured to dis-
play several different languages. The default
English version of all the menus is shown at
the front of this manual. If your language is
available, those menus will be shown in the
following instructions. If you would like to
change from the default English language
before proceeding, go to the instructions
for the OTHER OPTIONS menu later in this
manual. From this menu, you can change the
language display.

Menu Basics

Navigation Buttons

The following remote control buttons are used
to navigate the OSD menu system:
MENU/OSD button: Press to display the
SYSTEM STATUS screen. From the SYSTEM
STATUS screen, press the ENTER button to
display the MAIN MENU screen which has
links to all other menus. If a menu is already
visible, push this button to cancel the display.
The MENU button on the front panel provides
the same function.
DOWN/UP Buttons: Press to move up
and down in the lists of menu items that ap-
pear on the OSD screens.
+/– Buttons: Press to change the current
settings for a selected menu item on OSD
screens.
ENTER Button: From the SYSTEM STATUS
screen, press ENTER to display the MAIN
MENU screen. From any other OSD screen,
press ENTER to confirm a setting and return
to the MAIN menu.

System Status

���������������������
������������������
����������������
������������������
������������������������������
�������������������
���������������
��������������������������
�� �������������������
�������������
�������������������������������
������������
The SYSTEM STATUS menu provides a snap-
shot of the current system settings and a start-
ing point for reaching all other screens and
menus. This screen appears when you press
the remote MENU/OSD and displays the fol-
lowing information:
LISTEN: the input source selected for lis-
tening.
VIDEO INPUT: the video source selected
for viewing. It is necessary to assign a video
input, by selecting from Composite 1–3, S-Vid-
eo 1–3, Component 1–3, HDMI 1–4 or OFF
(no video) in the INPUT SETUP menu.
RECORD: the source selected for recording
from the VIDEO and AUDIO outputs.
MODE: the current surround sound mode.
AUDIO INPUT: the input selected for the
current source: Optical Digital, Coaxial Digi-
tal, HDMI Audio, Analog, etc.
VOLUME: the current volume setting.
SPEAKERS: highlights the speakers that
are currently configured for the system (front
right, center, subwoofer, front left, surround
left, center back 1, center back 2, and sur-
round right).
English