Canon CANOSCAN FB330 series Service Manual page 84

CHAPTER 3
3. Removing the drive wire
1) Remove the document cover.
2) Remove the document glass unit.
3) Remove the seal.
4) Pull the drive wire backward to remove it from the base frame through the left hole. (See
Figure 3-7)
5) Remove the wire spring from the base frame. (See Figure 3-9)
4. Precautions when attaching the drive wire
1) When the drive wire is twisted, untwist the wire naturally but not forcefully.
2) Locate the drive wire as shown in Figure 3-9.
3 - 10
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)