Canon CANOSCAN FB330 series Service Manual page 83

2. Precautions when attaching the drive unit
1) Apply appropriate amount of grease (as indicated by the quantity of rice piece) to the
positions shown in the figure below.
2) Locate the drive wire as shown in Figure 3-9.
3) Reuse the seal.
4) Connect the flat cable to the main PCB through a ferrite core, then take up the slack in the
flat cable.
1
1
3
q Grease Applying Positions
w Drive Wire
e Wire Spring
r Ferrite Core
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
1
3
2
Figure 3-9
CHAPTER 3
4
3 - 9