Canon CANOSCAN FB330 series Service Manual page 82

CHAPTER 3
4) Move the drive unit to the center.
4
1
2
2
q Drive Unit
w Drive Wire
e Seal
r Main PCB
Figure 3-8
5) Remove the contact image sensor. (Refer to III. A. 1, step 4), 5))
6) Remove the flat cable from the main PCB.
7) Remove the drive unit.
3 - 8
COPYRIGHT © 1999 CANON INC. CANOSCAN FB330/FB630 SERIES REV.0 OCT. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)